Pier-Tech Dome 1 (PTD1) base ring. Consisting of 2" thick MDO board and (18) 3" roller assemblies. The thickest base ring in the industry, and the most roller assemblies used for azimuth rotation in the industry.

Dome Track added to base ring. Ready for attaching dome skirt. 10-6 PTD1 Dome Skirt Wall installed - Entrance Door View Dome shown in Satin Finish Galvalume 10-6 PTD1 Dome Skirt Wall installed - Side view Dome shown in Satin Finish Galvalume 10-6 PTD1, Dome wall top ring installed Entry door side plates installed - ready for shutter track mount 10-6 PTD1, Dome second support ring installed, ready for roof sheets and roof sheet support ribs 10-6 PTD1, Dome shutter track support bracing and shutter tracks installed. Ready for the dome ribs and roof sheets. PTD1 shown in satin finish. 10-6 PTD1, Dome shutter track support bracing and shutter tracks installed. Ready for the dome ribs and roof sheets. PTD1 shown in satin finish. 10-6 PTD1, Dome shutter track support bracing and shutter tracks installed. Ready for the dome ribs and roof sheets. PTD1 shown in satin finish.

Pier-tech Domes and the editorial content, graphics, and products of the Pier-tech Domes website, unless otherwise noted, are the products of Pier-Tech, Inc. The information presented on Pier-tech Domes is copyrighted as collective work. Any unauthorized reproduction, by any means, mechanical or electronic, without the express written permission of Pier-tech, Inc. is strictly prohibited.

Copyright 2008, Pier-Tech, Inc.
All Rights Reserved